Current lmkd behavior to kill cached apps when free memory hits low
watermark threshold does not work well on certain devices where more
or less aggressive behavior would yield better results. Introduce a
tunable to control the min oom_score_adj level at which lmkd considers
to kill processes when the system gets into this state. The default
value is set to 701 which preserves the current behavior of killing
cached apps except for the last active one. Setting it to lower values
will make more processes eligible to be killed, setting it to higher
values will limit the kills to a smaller set of processes. Setting it
to 1001 will prevent any process from being killed for this reason.
Bug: 334867461
Bug: 337063274
Change-Id: I1447436e0a0cd1e696b34d2c06b92ff73a5100a9
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Free swap is calculated using the min of free swap that kernel would
consider using and easily available memory which can be used by ZRAM
for swapping purposes. However calculation does not consider the
average data compression ratio of ZRAM. Introduce a tunable to set
the average swap compression ratio used when evaluating the amount
of data which can be swapped. Default is set to 1 (no compression)
to keep current behavior. Setting it to 0 will ignore available memory
and assume that configured swap size can be always utilized fully.
Bug: 285854307
Bug: 327561101
Change-Id: I6b0f93ce24179ebf7365a3dbcd52c6e4a52ac200
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Add new command to allow for post-boot actions to occur. This
will allow for the MemEventListener to start after the BPF files are
loaded, removing the need to stall during boot-up until they are loaded
in the device.
Test: Verified memevent listener initialized post-boot
Test: Verified LMKD no longer stalls until BPF progs are loaded
Bug: 331008250
Bug: 244232958
Change-Id: I55f97b41349ea7693cff81b1170d33712b820292
Signed-off-by: Carlos Galo <carlosgalo@google.com>
Add kill reason for when the device is stuck in direct reclaim for
longer than the configurable threshold. Only allow configurable
threshold, and direct reclaim stuck detection, if memevents direct
reclaim monitoring is enabled.
Test: Verified direct reclaim stuck kill log with memory pressure test
Test: m
Bug: 244232958
Change-Id: I1156899874d2eb7e0f4b61597741087c110b3414
Signed-off-by: Carlos Galo <carlosgalo@google.com>
writepid command usage to join a cgroup has been deprecated in favor
of a more flexible approach using task_profiles. This way cgroup path
is not hardcoded and cgroup changes can be easily made. Replace
writepid with task_profiles command to migrate between cgroups.
Bug: 191283136
Test: build and boot
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: I594a5fc5e988f812237bd226aaecefa5f1159d2d
When a device boots, lmkd starts before persistent properties are loaded,
therefore if experiments set any flags, the corresponding persistent
properties will trigger change notifications when they are first loaded
during boot.
In order to prevent lmkd from re-initializing on every property load,
mark persistent property change by setting lmkd.reinit to 0 and delay
lmkd re-initialization until sys.boot_completed=1 when all properties
are set and only one re-initialization will capture them all. On devices
with no experiment flags being set lmkd.reinit will be undefined at the
boot completion time and re-initialization will not be triggered at all.
Bug: 194316048
Test: adb shell device_config put lmkd_native thrashing_limit_critical 350
Test: adb shell device_config put lmkd_native thrashing_limit 100
Test: adb reboot; adb -b all logcat | grep lmkd
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Iba34fc719a18d58b890549c7415bec869d471901
Allow persist.device_config.lmkd_native.* to override ro.lmk.*
properties to enable experiments with lmkd configuration properties.
Experiments will be able to set appropriate
persist.device_config.lmkd_native.<name> property which will issue
"lmkd --reinit" command to reinitialize lmkd with new parameters.
Bug: 194316048
Test: adb shell device_config put lmkd_native thrashing_limit_critical 350
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Ia48fd51eab126d307a1604530b642e86cf250688
Add --reinit command-line option to allow updating lmkd properties. For
example to enable debug logging in the running lmkd process user should
issue:
setprop ro.lmk.debug true
lmkd --reinit
Bug: 155149944
Test: lmkd_unit_test after resetting lmkd properties
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Ic60331f3368f5a7fdfe09ad7d47c7ccf0a497685
Associate each registered process with the PID of the lmkd client that
registered it to prevent one client from updating records of another
client.
Bug: 129011369
Test: boot and verify native service registration
Change-Id: Id8ca7bb6314df225d04da6469b523d2cdc237eaa
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Set F() capability set and 'drop' lmkd from AID_ROOT to AID_LMKD uid
and from AID_ROOT to AID_LMKD and AID_SYSTEM gid.
/dev/memcg/memory.pressure defaults to root.root mode 0000, set it up
as root.system mode 0040 to allow lmkd read access.
Instrument failure to set SCHED_FIFO.
Annotate access points that require elevated capabilities.
Test: check /proc/`pidof lmkd`/status for capability set
Test: lmkd_unit_test
Bug: 77650566
Change-Id: I986081a0434cf6e842b63a55726380205b30a3ea
Add the following mount options to the /proc filesystem:
hidepid=2,gid=3009
This change blocks /proc access unless you're in group 3009
(aka AID_READPROC).
Please see
https://github.com/torvalds/linux/blob/master/Documentation/filesystems/proc.txt
for documentation on the hidepid option.
hidepid=2 is preferred over hidepid=1 since it leaks less information
and doesn't generate SELinux ptrace denials when trying to access
/proc without being in the proper group.
Add AID_READPROC to processes which need to access /proc entries for
other UIDs.
Bug: 23310674
Change-Id: I22bb55ff7b80ff722945e224845215196f09dafa
Suren Baghdasaryan
Carlos Galo
Mark Salyzyn
Nick Kralevich
Tom Cherry